CAREERS enoc uae: APPLY NOW FOR THE LATEST VACANCIES

Emirates National Oil Company (ENOC) L.L.C. stands as one of the UAE’s most prominent and fully integrated energy enterprises, operating across every major segment of the oil and gas value chain. Founded in 1993 and wholly owned by the Government of Dubai, ENOC has grown into a globally recognized leader in the energy sector.

Today, the ENOC Group includes over 30 subsidiaries, covering key operations such as petroleum refining, lubricant blending, oil storage, aviation fuel services, and an extensive retail network. With a presence across more than 60 international markets, ENOC serves thousands of customers with reliable, innovative, and sustainable energy solutions.

Backed by a skilled workforce of over 9,000 professionals, ENOC continues to deliver best-in-class services, advanced technologies, and globally benchmarked practices—driving progress, supporting economic growth, and contributing significantly to the UAE’s long-term development.

MCM Technician

Job Purpose :Under the general guide and supervision of Chief Technician and within assignments allocated on daily by Area Superintendent, the jobholder performs a range of predominantly mechanical repair and preventive maintenance tasks on site and in the Ghusais workshop.

NOTE: Where possible on site visits, mechanical fitters will also be assigned electrical tasks. In the workshop, there is greater specialisation, especially on more complex jobs.

Principal Accountabilities :a. On-Site Breakdowns and Repairs:
Undertakes a wide range of repairs on site by analyzing faults, identifying defective parts, replacing components, checking settings, replacing motor assemblies, replacing all light fittings replacing generator belts, changing batteries, checking water, adjusting RPM, checking & replacing fire extinguishers, replacing leaking taps and flexible hoses, installing tyre meters and compressors, preparing reports on work done spares used, commencement and completion times, meter readings etc.
b. Outside Contract Jobs:
Assigns jobs to Contractors as per the established Rate/Maintenance Contracts. Follow up with Contractors for completion of jobs. Certifies satisfactory completion. Assist Area Superintendent/Area Engineer to develop quotes where a rate contract does not exist. The incumbent has to strive to minimize outsourcing of activities to keep the cost minimum.
c. On site Preventive Maintenance :
Keep schedule of Preventive Maintenance required for the sites assigned to technician. Follow up with Contractors to ensure timely completion. Verify service reports for the PM jobs and carry out on-spot inspection for quality of work.
d. Workshop Repairs :
Carries out repairs in the workshop by removing equipment from site, carrying out workshop modifications on submersible turbine pumps and dispensers, fitting piping and electrical circuitry in accordance with Engineer’s or manufacturers drawings, bench testing preparing gate passes, moving equipment from stores to sites. Also Carry out repairs of all electronic components of various models of dispensers
e. In-house Preventive Maintenance:
Operates a preventive maintenance programme by checking for leaks, checking flow rates, calibrating meters, replacing batteries, checking hose and nozzle condition, calibrating tyre meters, cleaning components and filters, topping up oil levels, replacing dials and bulbs, cleaning contacts, testing leak detector sensitivity, checking installations, flushing equipment.

f. Purchase and inventory of spares :
Purchasing minor spares such as nuts and bolts, chrome polish and other low cost items through petty cash, maintaining stock level and inventories and standard spare parts in the pick-up. Carry out physical verification once in six months and identify the reasons for variation if any.

g. Modification of dispensers:
Carry out necessary modification to convert a single product dispenser to a two product dispenser and vice versa to meet the operational exigencies as per manufacturer’s recommendation.

h. Commissioning of new sites
Carry out pre commissioning checks on all fuel related equipment at newly commissioned sites. Check all MICC cable work to ensure integrity of cabling system laid by contractor. Assist construction group with checking out cable connections for possible faults. Help IT department to set up their equipment like pump controllers.

i. Support to Distribution
Provide technical support to distribution in case of product contamination due to crossovers . Help to empty out underground tanks safely whenever wrong decanting/over fill takes place.

j. Documentation and system control
Accurately keep record of product taken out at sites for testing /Calibration. Enter correct quantities into system to ensure proper financial controls.

Additional Principal Accountabilities

Experience

Educational Qualification; Diploma in electrical /electronics /mechanical engineering or certificate course (ITI) with at least three years experience.
• Should have at least completed schooling up to secondary level (in technical stream) if no other technical qualification is acquired.
• Technical skills: Should be conversant with use of various tools like multimeter, mugger, earth tester, ratchet spanners. Etc .Experience in repairing of rotary equipment like pumps, repair of electronic circuit boards will be preferred.
• Specialized Skills: Should be conversant with maintenance of various types of air conditioners. Should be able to carry out complete maintenance independently with the help of supporting staff.
• Language skills. Should be able to speak, read and write English fluently
• Should be computer literate
• Age group: 25 to 30 years
• Driving License : MUST

Job Title : DRIVER

Business :Vehicle Testing and Registration

Job Purpose: Under the general supervision of the Vehicle Technician and Technical Supervisor is responsible for driving of customer vehicles, within the premises and parking them safely, only within the site (in accordance with the laid down procedures) and sometimes conduct basis vehicle tests, as directed by the Vehicle Technician.

Principal Accountabilities

Carries out vehicle driving and assists the vehicle technician in basic tests.

Parks the vehicle in the designated parking lot after testing is completed.

Maintains test lanes and testing equipment on a regular basis, as decided by the supervisor.

Additional Principal Accountabilities

Experience

Good general education ( High School Level)

Valid UAE driving license. – Light or Heavy

Technical background is an advantage

Good communication skills

Basic computer skills.

APPLY NOW

Important Notice for Job Seekers

At dubaimedias.com (https://dubaimedias.com), we are committed to sharing genuine and verified job vacancy information to help job seekers find the right career opportunities. Please read the following carefully:

Official Sources Only
All job vacancies published on our platform are sourced from official employers, company websites, or publicly available announcements.
100% Free Service
Our services are completely free. We do not charge job seekers any fees at any stage of the recruitment process.
Not a Recruitment Agency
dubaimedias.com is not a recruitment or placement agency. We do not conduct interviews, shortlist candidates, or guarantee jobs. Our role is limited to sharing job information for awareness purposes only.
Apply Directly
Candidates should apply directly with the respective employers as mentioned in each job post, following the application instructions provided.
Beware of Fraud
If anyone contacts you claiming to represent dubaimedias.com and asks for money for job placement, please consider it fraudulent. Do not respond and report such incidents immediately.